Accessories Guns
Sort by
Show
DONNYFL
KOI
.22, .25
- With a new rugged front cap design, signature DonnyFL body grooves and bolt endcap, the KOI is a great addition to any shrouded or un-shrouded air rifle. This model has the smallest outer diameter compared to the other DonnyFL models but don’t let the size fool you. With the added vent holes around the front, it is as impressive as the others.
- Features:
- Available in .22 and .25
- Mono-core design
- Precision CNC’ed by professional machinist
- Sand blasted and anodized for maximum durability
- Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt or 1/2 x 20 Cone
- Comes pre-wrapped in felt
- Machined grooves on the outside for easy handling
- Weight:
- 1. With 1/2 x 20 Bolt rear end cap: 4.7 oz
- 2. With 1/2 x 20 Cone rear end cap: 5.0 oz
- 3. With M20x1 Bolt rear end cap: 4.6 oz
DONNYFL
Kral Puncher Breaker 1/2 x 20 UNF Adapter #A8
- Features:
- Made by CNC for accuracy
- Material is 6061 T6 Aluminum
- Matte black anodize
- Diamond pattern knurling for easy grip
- Compatible with .22 and .25 calibers
DONNYFL
Leshiy Baffle Kit (compatible with
250 and 350 mm)
- This new V2 Leshiy baffle kit is now compatible with 250mm and 350 mm barrels. In this new redesign, the middle platform is lower compared to V1 allowing you to put more dampening materials.
- Compatible with .177 .22 and .25
- CNC machined
- Matte black anodized
- Price includes USPS Priority mail shipping
- Dampening material is not included. You can easily put felt or foam in there.
- Please note* Make sure to tighten the front cap really hard. Grab onto the extended shroud and tighten the cap. You want to compress the Oring as much as possible to prevent the metal baffle from moving. If it moves it will sound like a loud hammer slap.
DONNYFL
Leshiy ½ x 20 Adapter (350mm
barrels only)
- Have a 350mm barrel and want to be able to screw on a 1/2 x 20 moderator? Then this is the kit you want. Without the moderator, the gun is shorter than the factory setup. This adapter attaches to the barrel by 3 set screws.
- Only compatible with 350mm barrel
DONNYFL
P15 1/2 x 20 UNF Adapter #A10
- Nice addition to a nice entry level PCP bullpup
- Features
- Made by CNC for accuracy
- Material is 6061 T6 Aluminum
- Matte black anodized diamond pattern knurling thread protector
- Compatible with .22 and .25 calibers
DONNYFL
Ronin
.25, .30, .357
- Ronin is big and bold, I love the looks of him on my guns even my compact bullpups. Maybe a little overkill for the .177 and .22 but it looks so damn awesome!
- Available in .25, .30 and .357 calibers
- 1/2 x 20 UNF, Vulcan (M14x1.25) and FX (M20x1) rear caps available
- Mono-core design to increase accuracy and limit the chances of pellet clipping
- No moving parts or epoxy that may become loose after 1000's of rounds
- Precision CNC'd by professional machinist
- Sand blasted and anodized for maximum durability
- Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
- Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
- Comes pre-wrapped in felt
- Machined grooves on the outside for easy handling.
- Weight 10.4 oz
DONNYFL
Sam Yang/Seneca Big Bore M18x1 Adapter #A26
- Features:
- Made by CNC for accuracy
- Material is 6061 T6 Aluminum
- Matte black anodize
- Diamond pattern knurling for easy grip
- Compatible up to .357 to .50 cal
- Please note* Sam Yang has two different types of barrel threads, M16x1.5 and 5/8x18. Best way to determine which threads you have is to go to a hardware store and pickup one of the bolts. If the bolt does not screw on then it must be the other size. If your barrel is too close to the fill probe you will need to get the extended adapter version. I currently do not have the short version of the 5/8x18.
DONNYFL
Shogun
.25, .30
- If you thought Sumo was quiet wait until you hear Shogun. Shogun is just like Sumo but 1.5 inches longer. We added an additional 1 inch chamber as well as increase the first expansion chamber by .5 inches and the chamber by the exit hole another .5 inches. This design is very effective.
- Available in .25 and .30 calibers
- 1/2 x 20 UNF threaded end cap
- Mono-core design to increase accuracy and limit the chances of pellet clipping
- No moving parts or epoxy that may become loose after 1000's of rounds
- Precision CNC'd by professional machinist
- Sand blasted and anodized for maximum durability
- Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
- Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
- Comes pre-wrapped in felt
- Machined grooves on the outside for easy handling.
- Weight 7.2 oz
DONNYFL
Sumatra 2500 1/2 x 20 UNF Adapter #A25
- Features:
- Made by CNC for accuracy
- Material is 6061 T6 Aluminum
- Matte black anodize
- Diamond pattern knurling for easy grip
- Compatible with .22 and .25 calibers
DONNYFL
Sumo
.22, .25, .30
- THIS WILL BE BY FAR YOUR FAVORITE LDC. WHY SUMO?
- Mono-core design to increase accuracy and limit the chances of pellet clipping
- No moving parts or epoxy that may become loose after 1000's of rounds
- Precision CNC'd by professional machinist
- Sand blasted and anodized for maximum durability
- Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
- Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
- Comes pre-wrapped in felt
- Machined grooves on the outside for easy handling.
- Weight 5.6 oz
DONNYFL
Tanto
.22, .25
- Tanto had been the missing member of the DonnyFL collection, not anymore! This is a shorter version of the KOI. The Tanto is designed for people shooting at mid 800 and lower FPS.
- Features:
- Available in .22 and .25
- Mono-core design
- Precision CNC’ed by professional machinist
- Sand blasted and anodized for maximum durability
- Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt or 1/2 x 20 Cone
- Comes pre-wrapped in felt
- Machined grooves on the outside for easy handling
- Tanto with cone endcap is 5.37 inches
- Weight:
- 1. With 1/2 x 20 Bolt rear end cap: 3.9 oz
- 2. With 1/2 x 20 Cone rear end cap: 4.1 oz
- 3. With M20x1 Bolt rear end cap: 3.5 oz
DONNYFL
Tatsu
.22, .25
- Tatsu or "Dragon" will be a great addition for shooters who need to take the bark out of their gun yet keep the overall length short. This is a smaller version of the popular Sumo.
- Features:
- Available in .22 and .25
- Mono-core design to increase accuracy and limit the chances of pellet clipping
- No moving parts or epoxy that may become loose after 1000's of rounds
- Precision CNC'd by professional machinist
- Sand blasted and anodized for maximum durability
- Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
- Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
- Comes pre-wrapped in felt
- Machined grooves on the outside for easy handling.
- Weight 4.1 oz
- *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.